Well-known for its comprehensive ranges of connectors and cable assemblies, AtlanTecRF has introduced its range of high grade, yet affordable, coaxial adapters in the popular SMA and Type N series of interconnects. Suitable for use to 18 GHz and in some cases to 26 GHz, these professional quality adapters are available from stock and feature materials well suited to commercial, defence and aerospace environments.
RSS
RFMW Ltd. announces design and sales support for low passive inter-modulation (PIM) terminations from EMC Technology. The 32P7197F, 110 W flange mount termination boasts a PIM spec of -127 dBc with two 20 W input tones. Designed for demanding infrastructure applications, EMC’s 32P7197F operates to 2 GHz with a maximum VSWR of 1.25:1.
As a vital link in utilising a single coaxial cable to carry both RF signals and DC power, the new ABT series of Bias Tees from AtlanTecRF bring this capability to systems operating at frequencies up to 50 GHz. With RF connector choices of 2.92 mm, SMA and Type N the actual frequency bands offered range from 10 MHz to 2.5 GHz through to 50 KHz to 50 GHz with DC voltage capability to 100 Volts and current capacity to 2.5 Amps.
Barry Industries introduces an RoHS compliant flange mount termination which dissipates 800 W with minimal return loss over a DC to 1 GHz bandwidth. The thick film on aluminum nitride (AlN) TA50R0-800-15X termination, with its internally matched circuit architecture, has 25 dB or better return loss from DC to 1 GHz. The four-hole flange and input tab are constructed of robust nickel-plated copper. Overall footprint is 1.9” x 1.04”.
RFMW Ltd. announces design and sales support for P1dB’s 100 W, low PIM termination. Covering 0.8 to 2.6GHz, the P1dB P1LP-Term-716J100W features low PIM performance of <163dBc at +43dBm/tone. VSWR performance is 1.09:1 from a 7/16 female connector.
RFMW, Ltd. announces immediate delivery of selected, one meter cable assemblies from Florida RF Labs, Inc. The Lab-Flex® family of cable assemblies boasts six different cable types supporting applications to 65 GHz. They are extremely well-suited for high frequency test applications and high-density interconnects where insertion loss and stability over temperature are concerns.
Renaissance has developed a new X-Band iso-adapter that is designed for high rel applications requiring waveguide to coaxial transition. Operating between 8.2 to 12.4 GHz, the iso-adapter provides 0.5 dB of loss and 18 dB of reverse isolation. The output is WR90 for the waveguide interface with UG135/U flange. Input is a type N-Female connector.
Model STZ-10-I1 is a W Band full waveguide noise source. The noise source is silicon IMPATT diode based solid state noise source, which employs high performance diode and priority circuit design to offer nominal 12 dB ENR with extreme flatness in entire waveguide bandwidth from 75 to 110 GHz.
Model SWC-151F-R1 and SWC-151M-R1 are V band waveguide to 1 mm coaxial adapters. These adapters offer convenient mean for waveguide to coaxial line connection for full V band operations. Both WR-15 waveguide to 1mm (F) and WR-15 waveguide to 1 mm (M) coax adapters have less than 0.8 dB insertion loss and better than 16 dB return loss from 50 to 75 GHz.
RFMW, Ltd. announces design and sales support for a small profile, high power termination from EMC Technology. The SMT252503ALN2F covers frequencies to 4GHz with VSWR < 1.2:1 (1.13:1 <2.7GHz). Employing an Aluminum Nitride substrate, the SMT252503ALN2F handles up to 150W. Alumina or Beryllium Oxide substrates are also available.